It Lives

It's been close to year since I had to admit defeat with the Origami Chair. The time I had available to work on it had run out and there was a long list of previously designed commissioned work with fast approaching deadlines. 

I am fortunate to have very understanding clients and Jed is no exception. So, after a long delay, we are back Origami Chair, and we have come to snatch victory from the jaws of defeat. 

That big form from last year did get used. We did attempt to press the back legs, back rest and arm rest as one complete panel, it didn't work. Maybe it was the expansion / contraction from the moisture in my glue with alternating grain, maybe it was a lack of pressure in certain parts of my form, the point of the matter is it failed. Love your experiments, calm your brain, move forward. 

Once back at the drawing board the decision was made to forgo the idea of a chair composed of just 2 panels (parts). A little bit of an adjustment to the original form and I was able to press the back legs, and arm rests separate from the larger back panel. Basically I would create what you see above in three pieces instead of just one. 

These are the parts I managed to make last year before having to move on. There was still a glimmer of hope that this could all work out. What came next was maybe the biggest personal wood bending breakthrough I have experienced. Laminating with a strap. 

You call that a form?

It has been quite the journey since proving the folded paper concept could work. I have gone through many, many sheets of particle board / mdf and more coffee than I care to admit. It has taken days to build, and days to refine and alter. This form could likely keep the building from flying away in case of a hurricane at this point. I am not entirely sure how I managed to sort it all out, but somewhere amongst the caffeine and sleepless nights  (possibly related) I sorted through the angles, and the angles where angles meet angles.

The form is composed of 6 separate torsion boxes. Together they give me the angles I require, or at least I certainly hope so.

With the form "complete" I needed to devise a clamping strategy (no way this contraption was fitting in the vacuum bag). A clamping caul system was the only way I could conceive making it work, and so the adventure of making an elaborate set of clamping cauls began. 1.5" thick mdf formed the platens (compound angles meeting compound angles) that would sandwich the veneer with "sprung" beams running across them. Because I won't be able to get a clamp into the center of the panel and I don't own any 12" deep clamps I needed to "spring" the beams. Basically the beams are touching in the middle (peak of the triangle profile) of the platen and around an 1/8" high on each end where the clamping pressure will be applied. As the clamps get tightened they will close that 1/8" gap creating more pressure in the middle of the platen. Simple stuff really.

This is the first of two forms that will be used to make the chair. This one will be used to create a bent ply panel that will form the back rest, arm rests and back legs.